A rookie may find it difficult to jump-start their automobile, but with the appropriate information, it can be done quickly and without a hitch. In this post, you’ll learn how to jump-start your automobile using the jnc660 jump starter.

How to Start A Car With A Jumper Starter

When purchasing a new vehicle, be sure to read the owner’s handbook first! If your car has a positive ground, you’ll need to follow a separate set of jump-starting procedures. Jump-starts are also prohibited by several car manufacturers.

  1. Put on safety clothes and goggles.

2. Remove the keys from the ignition and turn the vehicle off.

3. Never place your face near the battery and remove any jewelry.

4. If you have something flammable with you, make sure the car isn’t near it.

5. You should keep your charger at least six feet away from your battery.

6. Consult your battery charger’s owner’s handbook for information on its recommended operating voltage. Check to see whether the voltage matches that of the jump starter. This is a power supply that comes with at least twelve volts.

7. Always look for the positive and the negative signals on your automobile battery by looking for the “P,” “POS,” or “+” sign on each terminal. Before securing the wires, make sure the area is free of corrosion.

8. Find the clamps indicating the negative and positive connections. There are two types of charger clamps: a red one and a black one.

9. Before connecting the jumper cables to the vehicle’s battery, ensure that your jump starter is turned off.

10. Clamps should not be allowed to touch one another.

11. Jumper cables should be connected to the appropriate terminals while both your car and your jump starter are parked and turned off.

  • Connect the positive battery terminal with the clamp that has a red color
  • Finally, attach the clamp colored black to a metal that is clean and not moving. Ensure the connection is far away from the engine and fuel lines.

12. Secure the clamps firmly to prevent them from coming undone.

13. You can power on your device after the jumper wires are securely in position. Always check for connections.

14. You may now attempt to start the automobile.

15. No more than five seconds should be spent turning the key in the ignition. Wait roughly 2-3 minutes before trying again if the vehicle won’t start. If the vehicle still won’t start after four or five tries, you may need a new battery.

16. Turn off the vehicle and the jump starter first if you need to adjust the jumper clamps. Once you’ve done that, you may begin working on strengthening the link.

17. Turn off the jump starter once the engine is running.

18. As a result, you should remove the negative (black) clamp first, then the positive (red) clamp. Now, put away the portable jump starter in a secure location.

19. You can finally get rid of those obnoxious goggles.

20. After the clamps are removed, let the car idle for a few minutes before starting it up again. You may now safely return to your house.

21. It’s critical to recharge the jump starter as soon as you get back to your house after a trip. The majority of portable jump starters are AC-powered and may thus be used with a standard wall socket. Charge it for at least three hours. Some devices take 12-24 hours of charging time to reach full capacity.

22. Check your car battery at the local battery center, as well, to determine whether it needs to be replaced and how long it will last.


Please enter your comment!
Please enter your name here